Lighting

- Replacement handlebar mount for Numen lights

A universal quick release mount that attaches to round-shaped drop and flat handlebars.

Grab a set of Portland Design Works tail light brackets to mount your lights on seat posts and seat stays. - Seat post and seat stay brackets - Rubber shims included for a custom fit - Compatible with all PDW tail lights except Asteroid and Fenderbot

Optional Accessory Rear rack Bracket for mounting most CatEye Taillights to rear racks with 50/80 mm spaced mounting holes.

The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

Recon-E Light to Bosch motor unit connector cable.

Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts

- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack

- Fits seatpost (up to 31.8mm) or seatstay - Compatible with: Blinky 3,5,7, all Superflash lights and Blinky Safety rear light - Use with Blinky Safety Front light bracket to fit oversize (~31.8mm) handlebars

An easy to attach mount that allows you to clip your Recon TL to any compatible Giant helmet.

If you're looking to mount your Lumina and Mako series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment. System Compatibility - Lumina Series - Mako Series

The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.

The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.

All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)

The TL 6.0 will help keep you safe and seen from behind (210-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash. Features - Lumen Output: 25 - 4 Modes with a Run Time up to 60h - 2 x AAA Alkaline Battery Powered - Weight: 70g - Battery: 2 x AAA Alkaline - Increased safety with 210° of Visibility - Budget Friendly Rear Lighting System - 25 Lumen taillight with Eye Catching Flash Patterns - Water / Dust Resistant IP64 Rated Run Time - Up to 60h

Problem Solvers' Braze-on Light mount threads into your fork or fender eyelets, allowing you to mount lights or accessories. It's lower position is great for getting your light closer to the ground for better visibility.

Perfect for E-city and E-trekking bikes, the fork mount puts the light directly on the fork crown above the mudguard, allowing space for a bag or shopping basket on the front of the handlebar.

- Maximum output to 20 lumens - ANSI certified lumens and runtime - IPX4 water resistant - Power status indicator alerts remaining run-time before powering off - Light memory mode - Compatible with Rev Comp, Compel, Roost, Strive, Lanza, Coveta, Liv Rev Comp and Luta series helmets

NiteRider understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the "entry level" commuter lights are nothing more than "be seen" lights. Your overall safety and visibility should not be limited by your budget, that's why NiteRider created the Mako Series. The Mako line offers three models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. A favorite feature is the side "gills" that emits light, it not only looks cool, but makes the Makos more visible. The Mako line is easy on the wallet and easy to operate. - Side lights - Economical, high output light - Super bright flash setting ideal for daylight use - Easy operation battery operated (comes with 2 x AA) - 3 light settings – High, Low and Flash - Lumen Output: 150 - Run Time: 18:00 – 72:00hrs - Weight: 175g - Battery: Alkaline AA x 2 WARRANTY The Mako 150 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Handlebar Mount - 2 AA Alkaline Batteries

To further rider safety and visibility, the CherryBomb 100 employs a custom-made, built-in reflector that allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included for flexible mounting options. Features - Lumen Output: 100 - 4 Modes with a Run Time up to 136h - 2 x AAA Alkaline Battery Powered - Weight: 82g - Battery: 2 x AAA Alkaline - Highly Visible up to 1 Mile - 100 Lumen Daylight Visible taillight - Water / Dust Resistant IP64 Rated Run Time - Fast Flash—96:00h - Pulse Flash—136:00h - Steady High—72:00h - Steady Low—127:00h

Portland Design Works' Danger Zone Taillight will enhance your visibility like the beacon on a jetfighter with two 1/2-watt LEDs. It boasts three modes and includes seatpost, seatstay,. and backpack mounts, too. - ?Two 0.5 watt red LEDs by Nichia Brand - Three modes: zZz, a-HA!, and Rock Steady - Up to 50 hours run time on 2xAAA batteries (included) - Includes Stayputnik seatpost mount - Weatherproof exterior for all season riding - Weight: 57g (2oz)

Compact and Versatile. The Recon TL100 is easy-to-use, ultra-portable and lightweight. With an integrated power indicator and IPX7 waterproof certification, the Recon TL100 provides maximum high-powered visibility at an accessible price. - Maximum output to 100 lumens - ANSI-Standard certified lumen output and runtime - Water proof to IPX7 standard - Disperse optics with side light design for over 180-degrees of visibility - Power status indicator alerts remaining run-time before powering off - Light memory mode - Compatible with Rev Comp, Compel, Roost and Prompt series helmets

The Mako line offers four models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. Our favorite feature is the side "gills" that emits light, it not only looks cool but makes the Makos more visible. The Mako line is easy on the wallet and easy to operate. The TL 6.0 has five ultra-bright LEDs with four different operating modes, including three different flash modes. The amber Side Lights help to provide even more visibility from the sides of the rider. The TL 6.0 will help keep you safe and seen from behind (180-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash. Mako 200 - Side lights - Economical, high output light - Super bright flash setting ideal for daylight use - Easy operation battery operated (comes with 2 x AA) - Run Times: 15:00 – 60:00 hours - 3 light settings—High, Low, and Flash - Water / Dust Resistant IP64 Rated TL 6.0 - 5 Ultra Bright LEDs - Up to 60 hours run time - Cost-effective, high-quality light - Super bright day time flash mode - 3 operating modes - Runs on AAA batteries - Water / Dust Resistant IP64 Rated

NiteRider understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the “entry level” commuter lights are nothing more than “be seen” lights. Your overall safety and visibility should not be limited by your budget, that's why NiteRider created the Mako Series. The Mako line offers four models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. The Mako line is easy on the wallet and easy to operate. - Low cost, high powered light - Highly visible in traffic = keeps you safe - 3 light settings – High, Low and flash - Tough durable design - Lumen Output: 250 - Run Time: 12:30 – 28:00hrs - Weight: 175g - Battery: Alkaline AA x 2 WARRANTY The Mako 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Handlebar Mount - 2 AA Alkaline Batteries

The NiteRider Swift 300 delivers everyday reliable performance in an economical ultra compact head light. Sporting features like an easy on and off handlebar strap mount, low battery indicator and to top it off, it's USB Rechargeable; making it the perfect light of choice for commuters and cycling enthusiasts. Although small in size, make no mistake; the Swift 300 packs a big punch with a maximum light output of 300 lumens! Powered by an internal Lithium Ion battery, in Walk Mode, the Swift 300 can run for up to twenty-seven hours before it needs a charge. - Highly durable design made with fiberglass reinforced plastic - Smooth 300 lumen beam pattern in an ultra compact and lightweight design - Innovative Collimator Lens – optimizes your field of view - Built-in, easy on and off handlebar strap mount - 4 Light Levels plus 1 Daylight Flash Mode - Fuel Gauge / Battery Level Indicator - FL1 Standard IP64, dust and water-resistant - Convenient USB rechargeable WARRANTY - The Swift 300 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Build-in, Handlebar Mount - USB Charging Cable

We understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the "entry level" commuter lights are nothing more than "be seen" lights. Your overall safety and visibility should not be limited by your budget, and that's why we created the Mako Series. The Mako line offers four models and up to 250 lumens, not only allowing the cyclist to be seen but allowing the cyclist to see as well. The Mako line is easy on the wallet and easy to operate. For much of night riding, the key to survival is not only seeing but also being seen, the CherryBomb 100 addresses the latter. By incorporating a unique multi-directional collimator specifically designed for cycling, the CherryBomb 100 maximizes visibility by dispersing light to the sides of the rider as well as to the rear, effectively eliminating blind spots to upcoming automobiles. To further rider safety and visibility, the CherryBomb 100 employs a custom-made, built-in reflector which allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included, for flexible mounting options. Mako 250 - Low cost, high powered light - Highly visible in traffic = keeps you safe - Run Time: 7:00 – 28:00 hours - 3 light settings—High, Low, and Flash - Tough durable design - Water / Dust Resistant IP64 Rated CherryBomb 100 - Daylight Visible Flash (DVF) - Up to 136 hour run time - Visible up to 1 mile - Internal reflector = visible if light in off mode - Easy to operate AAA batteries - Super bright day time flash mode - Be Seen by cars = Be Safe - Water / Dust Resistant IP64 Rated

The NiteRider Swift 500 delivers everyday reliable performance in an economical ultra compact head light. Sporting features like an easy on and off handlebar strap mount, low battery indicator and to top it off, it's USB Rechargeable; making it the perfect light of choice for commuters and cycling enthusiasts. Although small in size, make no mistake; the Swift 500 packs a big punch with a maximum light output of 500 lumens! Powered by an internal Lithium Ion battery, in Walk Mode, the Swift 500 can run for up to twenty-five hours before it needs a charge. - Highly durable design made with fiberglass reinforced plastic - Smooth 500 lumen beam pattern in an ultra compact and lightweight design - Innovative Collimator Lens – optimizes your field of view - Built-in, easy on and off handlebar strap mount - 4 Light Levels plus 1 Daylight Flash Mode - Fuel Gauge / Battery Level Indicator - FL1 Standard IP64, dust and water-resistant - Convenient USB rechargeable WARRANTY - The Swift 500 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Build-in, Handlebar Mount - USB Charging Cable

When you absolutely, positively need to be seen, day or night, rain or shine, trust CatEye's brightest rear safety light. The ViZ450 features 5 LEDs, 300-degree visibility, OptiCube lens technology, and makes sure you stand out with the power of Daytime Hyperflash mode. - 5 LEDs (450 lm) - Highly visible during daytime - 300 degree visibility - Long rear beam projection - OptiCube lens technology - Lithium-ion rechargeable battery - USB rechargeable (Micro-USB cable included) - Low battery indicator - 4 modes *Charging time: 3.5h - Mode memory function - Battery Auto Save (The mode automatically changes to flashing when the battery power gets low.) - New seat post bracket SP-15 which fits contemporary (kammtail) aero seatpost - Snap System Run time: - Constant (40 lumens):5 hrs - Flashing (40 lumens):65 hrs - Group Ride (130 lumens):10 hrs - Daytime Hyperflash (450 lumens):14 hrs

The Recon HL600 is the perfect multi-function light for use on handlebars or helmets. It features abundant light output in a lightweight design. - Lumens and runtime certified to the ANSI-Standard - Focused optics with side light design for over 270 degrees visibility - Heat-dissipating CNC-machined aluminum structure - Power status indicator can let you know how much run-time to go before powering off - Includes adjustable GoPro mount